HDRA Series
• VHDCI (Very High Density Cable Interconnect): The next-generation standard interface connectors conforms with ANSI (American National Standards Institute) / SFF8441 standards.
• Enables high density packaging by providing 68-contact connectors arranged at a narrow pitch of 0.8mm in 2 rows.
• The PCB mounted (single-stage type) connectors are low profile with an overall height of 6 mm from the PCB surface.
• To protect signal circuits, the shield shell touches the shell of connector before the contacts touch their mating contact.
• The cable mounted connectors provide a sealed metallic-shell shielding structure. This metallic shell is an over-molded type, providing a complete EMI/ESD-filtered structure.
• Applications: External connection between the portable PC and its peripherals (SCSI-III, PCI bus, etc.), and smaller-sized electronic devices.

Specifications    
Number of contacts : 68, 100
Rated voltage : 30 V AC (r.m.s.)
Rated current : 0.3 A
Dielectric withstanding voltage : 250 V AC (r.m.s.) for up to one minute
Insulation resistance   Over 500 megohms at 100V DC
Contact resistance   70 milliohms or less
Wire sizes   AWG#30, AWG#32 or AWG#34

 
 
  HDR Series
• Developed as the sister of the PCX series connector and arranged at a pitch of 0.8 mm to meet the market needs for smaller-sized high density connectors.
• EMI/ESD-filtered and over-molded type metallic housing.
• To protect signal circuits, the shield shell touches the shell of connector before the contacts touche their mating contact. These connectors provide for layered structure allowing up to two stacked connections.
• One-touch-lock and detachable / re-attachable housing gives excellence operability and ensures connector mating because "you feel a click".
• Cable mounted connection is performed by IDC method using a specialized tool, so that connector attachment is quick and secure.
• Very small surface mount (SMT) interface connectors provide, an EMI/ESD-filtered structure, a hold-down structure to reinforce strength, and a fastening screw structure.
• Low profile with overall height of 5 mm from the PCB surface.
• DIP type connectors are also available.
• Applications: Notebook PCs, electronic notebooks, and other electronic equipment.

Specifications    
Number of contacts : 14, 26, or 50
Rated voltage : 125 V AC (r.m.s.)
Rated current : 0.5 A
Dielectric withstanding voltage : 350 V AC (r.m.s.) for up to one minute
Insulation resistance : Over 1,000 megohms at 250 V DC
Contact resistance : 70 milliohms or less
Wire sizes : AWG#28 or AWG#30

 
 

0.8 mm Pitch Smaller-Sized Connectors for Interface

  HDR Series (screw-lock type)
• • Cycles of insertion and extraction: 5,000
• Provides a screw lock type housing (cable size: 5.9-6.2 mm diameter) with shield, which is required for secure connection with equipment utilized for such as factory automation (FA), or provides soldering type connector capable of connecting with cable of AWG28-AWG32.
• Applications: Handheld terminal, small-sized office automation equipment, peripheral devices, factory automation (FA) equipment, etc.

Specifications    
Rated voltage : 125 V AC (r.m.s.)
Rated current : 0.5 A
Dielectric withstanding voltage : 350 V AC (r.m.s.)
Insulation resistance : Over 1,000 megohms at 250 V DC
Contact resistance : 70 milliohms or less