Connectors for Transceivers

  AKX series
• AKX series connectors consist of a connector and cage. The connector and cage conform to MSA (Multi-Source Agreement).
• Can be used as a host connector for SFP transceivers or a connector for differential and high-speed transmissions.
• Available for either of two methods of mounting cage onto a PCB, solder type and press-in type.
   
  AKX-20LFY (G1)
• Conforms to MSA (Multi-Source Agreement).
• 20 contacts with 0.8 mm pitch.
• Contact surface is changed from cross section to roll type surface contact. Contact durability of pad and contact surfaces on a PCB with built-in transceiver has been improved and the reliability has increased.
• Excellent high-speed transmission characteristic has been achieved by selecting an optimal design for differential transmission and suitable insulation material.
• Lower insertion loss has been achieved by matching impedance.
• Achieves low reflection attenuation by clearing away stubs that occur in press-in section, which is integral to in-line products.
   
  AKX-CG/AKX-CGP
• Conforms to MSA (Multi-Source Agreement).
• The cage can be installed on a PCB by solder or press-in method.
• The cage consists of an upper and lower cage. For press-in type mounting, the upper
and lower cages are shipped after assembly. For solder type mounting, the upper
and lower cages can be shipped either before or after being assembled.
• The upper and lower cages are attached at 6 places on a PCB by soldering.
• For soldering method, provides temporally lock mechanism with the cage on a PCB,
thus achieving good workability.
• The transceiver can be reliably ejected (unlocking).
• Right angle type female package connectors. Straight type male backplanes connectors.

 
 

Serial ATA Connectors

  HSA series
• Serial ATA connectors are successors to the parallel type ATA. Currently, as memory capacity of hard disks has increased, higher-speed interfacing is required.
• To respond to that need, serial transmissions have been used.
• Serial ATA contributes to the improvement of thermal design and the implementation of small-sized systems, because cable wiring and mounting become simpler with the use of the small-sized connectors with few pins, and a thin flexible cable.
• Wiring on the motherboard can be more easily and flexibly routed.
• By using plug connectors and receptacle connectors and cable harnesses, which conform to serial ATA standard (Rev. 1.0), products supporting various applications have been developed.
• Supports transmission speed of 1.5 Gbps (first generation) or 3.0 Gbps (second generation).
• By utilizing an electromagnetic field simulator, matching characteristic impedance. Further excellent transmission characteristics have been achieved by low crosstalk, low reflection attenuation, and low insertion loss.
• Cable assemblies with female connectors for power supplies are connected with a crimping technique, utilizing our own unique connection technologies, and thus achieving good workability.
• Receptacles are provided in either low or high profile types.

Specifications    
Rated voltage : 100 V AC (r.m.s.)
Rated current : 1.5 A
Characteristic impedance (differential) : 100 ohms 15%, Tr: 70ps (20 - 80%)
Cross talk (differential) : Max 5%

 
 

Connectors conforming to Serial Attached SCSI Standard

  HSAS Series
• Complying with Serial Attached SCSI standard.
• Achieves transmission rates of 3 Gbps.
• Excellent transmission characteristics are obtained by utilizing electromagnetic field simulator.
• The characteristic impedance is matched.
• Low crosstalk.
• Low insertion loss.
• Low reflection attenuation.

Specifications    
Rated voltage : 100 V AC (r.m.s.)
Rated current : 1.5 A/0.5 A DC
Characteristic impedance (differential) : 100 ohms 15 %
Cross talk (differential) : Max 5 %

 
 

InfiniBand Standard I/O Connectors

  HIB series
• Conforms to InfiniBand Trade Association (IBTA) standard for high-speed communications, for the next generation.
• When transmitting signals through I/O connectors, differential signals are utilized, and each pair of signals is shielded. By reducing noise between each signal and from the outside, high-speed transmission rates of 2.5 Gigabytes per second (1.25 GHz) can be achieved.
• Achieves a low insertion loss and a low crosstalk by shielding each pair of differential signals.
• Assembling of connector and core cable is performed through a PCB, which is available for mounting components such as an equalizer.
• Using our own soldering method for cable drain wires, assembly can easily be performed, since the pitch for the soldering section becomes wider.
• The connectors can be used not only as InfiniBand 4X I/O connectors but also as I/O connectors (10GBASE-CX4, SAS, etc.) for high-speed differential signals.
• Provides a screw lock type connector conforming ANSI SFF-8470 standard.
• Signals can be transmitted distances of up to 8 m (AWG#24 cable) because an equalizer is mounted on the PCB in the cable plug. Furthermore, you can replace the equalizer with one suited to the device used.

Specifications    
Rated voltage : 30 V AC (r.m.s.)
Rated current : 0.5 A / pin
Dielectric withstanding voltage : 200 V AC (r.m.s.)
Insulation resistance : Over 100 megohms at 100 V DC