Back Connectors for PC Card I/O

  RMC Series
• The RMC series connectors have 0.8 mm pitch contacts for mobile equipment.
• EMI-filtered with metallic shell.
• High density and thin contact arrangement.
• Quick locking with lock springs.
• With a function of seguence connection.
• Various key forms for preventing misinsertion are available.

Specifications    
Number of contacts : 9, 15, 30, 32
Rated voltage : 150 V AC (r.m.s.)
Rated current : 0.5 A
Dielectric withstanding voltage : 500 V AC
Insulation resistance : Over 100 megohms
Contact resistance : 40 milliohms or less

 
   

RMC/RMCF Type I/O Back Side Connectors

  RMC/RMCF Series
• Because these connectors are thin low profile types, high density mounting is possible.
• Because these connectors have a one-touch-bail-lock, they can be easily detachable / reattachable.
• Supports a large variety of center off-set terminals.
• Static electricity prevention measures are completely assured with the metallic shell.

Specifications    
Rated voltage : 150 V AC (r.m.s.)
Rated current : 0.5 A
Dielectric withstanding voltage : RMC: 500 V AC (r.m.s.); 1,500 V AC (r.m.s.) for LAN cards
RMCF: 350 V AC (r.m.s.)
Insulation resistance : Over 1,000 megohms at 250 V DC
Contact resistance : 40 milliohms or less
Contact pitch : RMC: 0.8 mm, RMCF: 0.6 mm
Slot Connectors

 
 

Connectors for the Next Generation Cellular Phones, Wideband Code Division Multiple Access (W-CDMA)

  PXF Series
• Conforms to standards of the Japan Electronics & Information Technology Industries Association EIAJ RC-5238 IMT-2000 for Connector A of cellular phones.
• Provides small-sized light-weight connectors.
• Allows live wire connections for signal contacts.
• Uses bellows type contacts for high connection reliability of signal contacts.
• Provides connectors with a switch for coaxial cables.
• Number of signal contacts: 11 (includes one for coaxial cable).
• Supports high-speed data transmission, Universal Serial Bus (USB).

Specifications    
Rated voltage : 100 V AC (r.m.s.) / DC
Rated current : 1.0 A (for contacts numbered: 1, 4, 5, 6, 10)
0.5 A (other contacts)
Dielectric withstanding voltage : 300 V AC (signal contacts)
100 V AC (coaxial contact)
Insulation resistance : Over 1,000 megohms at 250 V DC (signal contacts)
Over 1,000 megohms at 100 V DC (coaxial contact)

 
 

Narrow Pitch Connectors for Interface

  PXH Series
• The PXH series of connectors are narrow pitch connectors for interfaces, which are used for mobile equipment such as smaller-sized and light-weight PDAs.
• Contact pitch is 0.5 mm. However, this series utilizes highly reliable bellows type contacts.
• This robust and metallic shell provides a complete ESD-filtered structure.
• Since the housing is small and low-profile, size reduction of equipment can be achieved.

Specifications    
Number of contacts : 16
Rated voltage : 30 V AC (r.m.s.)
Rated current : 0.5 A
Dielectric withstanding voltage : 300 V AC (r.m.s.) for up to one minute
Insulation resistance   Over 1,000 megohms at 250 V DC
Contact resistance   50 milliohms or less

 
 

Connectors for Small-Sized Mobile Terminals

  BCL-C Series
• The BCL-C series of connectors for mobile equipment have been designed for smallsized mobile terminals. They are 1 mm pitch space saving low-cost type connectors. The BCL-C series are of same type male connector used with a PDA body and cradle, and the same type female connector is used with a PDA cable. So, the cable side connector can be easily connected with a PDA body or PDA cradle.
• Male connectors are molded with rubber packing for waterproofing.
• Female connectors, which are used with the cradle and cable, ensure 10,000 insertion and extraction cycles because of the wiping effect on the contact surfaces due to the insertion and extraction.
• Polarity key position can be changed.
• Since the cable side connector is solder type terminals, it can be easily connected with a USB cable, serial bus cable, etc.

Specifications    
Number of contacts : 18
Rated voltage : 21 V AC (r.m.s.)
Rated current : 0.7 A for signal contacts; 2.8 A for power supply contacts
Dielectric withstanding voltage : 300 V AC (r.m.s.) for up to one minute
Insulation resistance : Over 500 megohms at 500 V DC